Rosco Vapour Plus Fogger

Vapour Plus produces a massive blast of fog! And then…more fog.
The colossal fogger in Rosco’s Vapour machine family is able to fill the
largest venues and create the most impressive bursts of fog needed –
yet it’s small enough to mount in box truss and power from a single
mains circuit.
Creating fog effects in stadiums, concert halls and auditoriums is a
struggle between speed and power. Fast fill time means more amperage
and careful monitoring to keep the heat exchanger hot. The sophisticated
software driving the Vapour Plus excels here, as it precisely balances the
heating and pump cycles to insure you have huge fog when you need it.
At 100% output, Vapour Plus will run for a full 60 seconds before a short
re-heating cycle is needed. And the giant output of this machine is
capable of consuming more than 7 liters of fluid per hour!
Vapour Plus comes standard with a timed remote and digital DMX controls. Multi-Link allows a single Vapour Remote Console to control
up to four Vapour, Vapour Plus, or V-Hazer units that are daisy-chained together via 3-pin XLR.
An innovative, rotating bottle carriage allows the Vapour Plus to be placed in either the traditional horizontal position or in a vertical
orientation. This feature, coupled with the massive fog blasts produced by the Vapour Plus, allows the machine to produce CO2-like
burst effects.
Repair technicians will appreciate the thoughtful engineering evident inside the Vapour Plus. Core components were designed to be
replaced quickly, and the electronics are fully separated from fluid paths to minimize damage in the unlikely event of leaking or
contamination during transport.
The Rosco Vapour Plus has been tested for use in professional theatrical productions and is included under the Equipment-Based Guidelines of the Equity-League Pension
and Health Trust Funds. The Vapour Plus is also compliant with the Alliance of Motion Picture and Television Producers Safety Bulletin #10.